Hyster S40XM Скачать руководство пользователя

Страница: 49 / 134

OPERATING PROCEDURES

that keep the forks in position are engaged so that the

forks cannot move.

4. Check the condition of the driving surface. Make sure
the floor will support the weight of the lift truck and the
load.

Load Handling, Lifting, Lowering And Tilting

The

LIFT

and

TILT

functions are controlled by separate

levers. See the INSTRUMENTS AND CONTROLS sec-

tion for the correct operation.

The speed of the hydraulic functions is controlled by the
position of the control levers. The farther the hand lever is

moved from the

NEUTRAL

position, the faster the speed

of the hydraulic function.

Do not lift or hit anything that can fall on the operator or a

bystander. Remember, a lift truck equipped with a HYS-
TER overhead guard and load backrest extension pro-
vides reasonable protection to the operator from falling

objects, but can not protect against every possible impact.

A lift truck without an overhead guard provides no such
protection and other personnel have no overhead protec-

tion. Avoid hitting objects such as stacked material that
could become dislodged and fall.

Property of American Airlines

Содержание S40XM







































































































































Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды

Hyster S40XM, Руководство по эксплуатации

Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды