Hyster S40XM, Руководство по эксплуатации

Страница: 112 / 134

MAINTENANCE
110
3. The steering wheels are fastened to the spindle of the
steering axle with a large castle nut. Make sure the inner
and outer bearings are correctly lubricated with grease.
Install the inner bearing assembly and wheel on the
spindle. Install the outer bearing cone and castle nut.
Tighten the castle nut up to 200 Nm (150
lbf ft
) torque
while the wheel is rotated. Loosen the castle nut until the
hub turns freely with no looseness. The torque must be
less than 27 Nm (20
lbf ft ). Tighten the castle nut to 34
Nm (25 lbf ft ) torque. Install the cotter pin in the castle nut
at the first alignment. Install the cap for the bearings.
NOTE: Outside edges of wheel and
tire rim are even for all drive and
steer wheel assemblies.
2
1. SOLID RUBBER TIRE
2. WHEEL
FIGURE 28. TIRES AND WHEELS FOR S40--65XM LIFT TRUCKS
1
1
2
DRIVE TIRES AND WHEELS
STEERING TIRE AND WHEEL
16 x 5 x 10
1
/
2
21 x 7 x 15 OR 21 x 8 x 15
Property of American Airlines