Hyster S40XM Скачать руководство пользователя страница 44

Страница: 44 / 134

OPERATING PROCEDURES

If a lift truck is used to elevate a worker, a safety plat-
form must be attached to the forks and carriage. It

must have a solid floor with a surface to prevent the
feet of the worker from slipping, hand rail, toe board

and a screen or shield at least 2 metres (7 feet) high
between the people on the platform and the lift mech-

anism.
Before anyone is allowed in the platform, lift and low-

er the mast slowly with the platform in place to make
sure the mast functions properly. Apply the parking

brake. Do not travel with people in the platform. The
operator must remain at the controls. Watch for over-

head obstructions.

3. Do not drive a lift truck into an elevator unless autho-
rized to do so. Approach the elevator slowly. After the ele-

vator is properly levelled, the lift truck must be centered

so that the elevator is balanced.

When the lift truck is in the proper position in the elevator,

set the brakes, put the controls in

NEUTRAL

and shut off

the power. It is advisable that all other personnel leave the
elevator before the lift truck enters or leaves.

4. Drive carefully, observe traffic rules and be

in full control of the lift truck at all times. Be
completely familiar with all the driving and load
handling techniques contained in this

OPER-

ATING MANUAL

Driving And Direction Changes

The following paragraphs describe how to operate the

transmission. The lift truck can have either a
MONOTROL

pedal or a direction control lever to control

Property of American Airlines

Содержание S40XM







































































































































Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды

Hyster S40XM, Руководство по эксплуатации

Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды