Hyster S40XM, Руководство по эксплуатации

Страница: 122 / 134

MAINTENANCE
120
Always wear safety glasses.
1. Put the lift truck on blocks as described in “ How To Put
The Lift Truck On Blocks ” at the beginning of this sec-
tion.
2. Remove the wheel nuts and remove the wheel and tire
from the lift truck. Lift truck tires and wheels are heavy.
Remove The Tire From The Wheel
(See FIGURE 36.)
WARNING
Keep tire tools in firm contact with the wheel. If the
tool slips, it can move with enough force to cause
serious injury.
NOTE: See FIGURE 29. when you disassemble the
wheels. There are several types of wheels used on these
series of lift trucks.
Install The Tire On The Wheel
(See FIGURE 37.)
WARNING
Failure to follow these procedures will cause damage
to the tire and wheel assembly and can cause injury.
•
Clean and inspect all parts of the wheel before
installing the tire.
•
DO NOT use any damaged or repaired wheel
parts.
•
Make sure that all parts of the wheel are the
correct parts for the wheel assembly.
•
DO NOT mix parts between different types or
manufacturers of wheels.
•
DO NOT mix type of tires, type of tire tread or
wheel assemblies of different manufacturers on
any one lift truck.
Do not use a steel hammer on the wheel. Use a rub-
ber, lead, plastic or brass hammer to put parts to-
gether. Make sure that the lock ring is in the correct
position. The ends of the lock ring must not touch.
The clearance at the ends of the lock ring will be
approximately 13 to 25 mm (0.5 to 1.0 in) after it is
installed. If the clearance is wrong, the wrong part
has been used.
NOTE:
When you assemble the wheels see FIGURE 29.
There are several types of wheels used on this series of
lift trucks. Do not use a two--piece pneumatic wheel for
solid rubber tires.
Property of American Airlines