Hyster S40XM Скачать руководство пользователя

Страница: 41 / 134

OPERATING PROCEDURES

4. Turn the key to the

START

position to crank and start

the engine. The indicator light will be

while the starter

is cranking and go

OFF

when the key is released.

CAUTION

Use only approved starting aids. The use of non--ap-

proved starting aids can result in engine damage and

void engine warranty.

5. If the engine does not start after four attempts, get help

from authorized service personnel.

6. When the engine is running, check the gauges and in-

dicator lights for the correct operation. See the IN-
STRUMENTS AND CONTROLS section for a description
of the correct operation.

Checks With The Engine Running

WARNING

FASTEN SEAT BELT
If Lift Truck Tips Over

•

Do Not Jump -- Stay On Truck

•

Hold Firmly To Steering Wheel --
Brace Feet -- Lean Forward And

Away From Impact

The seat belt is installed to help the

operator stay on the truck if the lift
truck tips over. IT CAN ONLY HELP IF

IT IS FASTENED.

The operator must be aware that the lift truck can tip over.
There is a great risk that the operator or someone else

can be killed or injured if trapped or hit by the truck as it

Property of American Airlines

Содержание S40XM







































































































































Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды

Hyster S40XM, Руководство по эксплуатации

Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды