Hyster S40XM, Руководство по эксплуатации

Страница: 111 / 134

MAINTENANCE
109
How To Change A Solid Rubber Tire
S40--65XM Models
(See FIGURE 28.)
Solid rubber tires made from softer or harder material can
be installed as optional equipment. The tread on the solid
rubber tires can be either smooth or it can have lugs. Do
not mix types of tires or tread on the lift truck.
WARNING
The type of solid rubber tire is shown on the Name-
plate. Make sure the Nameplate is correct for the type
of tires on the lift truck.
Wheels must be changed and tires repaired by
trained personnel only.
Always wear safety glasses.
1. Raise the lift truck as described in HOW TO PUT A
LIFT TRUCK ON BLOCKS in this manual.
2. Remove the wheel nuts and remove the wheel from the
lift truck. Lift truck wheels are heavy.
Remove And Install The Tire On The Wheel
1. The correct tools, equipment and a press ring must be
used for each size of wheel. Use a press to push the
wheel from the rim and tire. The capacity of the press
must be approximately 355 kN to 1779 kN (80,000 to
400,000 lb). For the tire sizes, see the Nameplate.
NOTE: Make sure the tires are installed on the wheels so
that the outside edges of the tire and wheel are as shown
in FIGURE 28. Also check the Nameplate of the lift truck
for the correct tire size and tread width.
2. When the drive wheels are installed on the lift truck,
tighten the wheel nuts to the value shown in the MAINTE-
NANCE SCHEDULE.
WARNING
Check all wheel nuts after 2 to 5 hours of operation:
when new lift trucks begin operation and on all lift
trucks when the wheels have been removed and
installed. Tighten the nuts in a cross pattern to the
correct torque value shown in the MAINTENANCE
SCHEDULE. When the nuts stay tight for eight hours,
the interval for checking the torque can be extended
to 250 hours.
Property of American Airlines