Hyster S40XM Скачать руководство пользователя

Страница: 38 / 134

OPERATING PROCEDURES

In order for the lift truck to be stable (not tip over forward

or to the side) the CG must stay within the area of the lift
truck represented by a triangle drawn between the drive
axle and the pivot of the steering axle.

CG --- Truck Will Tip Over

Drive Axle

Steering Axle

If the CG moves forward of the drive axle, the lift truck will
tip forward. If the CG moves outside of the line repre-

sented by the lines drawn between the drive wheels and
the steering axle pivot, the lift truck will tip to that side.

Capacity (Weight And Load Center)

The capacity of the lift truck is shown on the Nameplate.

The capacity is listed in terms of weight and load center.
The weight is specified in kilograms and pounds. The load

center is specified in millimeters and inches. The capacity

is the maximum load that the lift truck can handle for the
load condition shown on the Nameplate.

The load center of a load is determined by the location of

its center of gravity. The load center is measured from the
front face of the forks, or the load face of an attachment,

to the center of gravity of the load. Both the vertical and
horizontal load centers are specified on the Nameplate.

Loads should be transported while centered on the cent-
erline of the lift truck. The operator must know whether or

not a load is within the maximum capacity of the lift truck
before the load is handled.

Property of American Airlines

Содержание S40XM







































































































































Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды

Hyster S40XM, Руководство по эксплуатации

Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды