Hyster S40XM, Руководство по эксплуатации

Страница: 119 / 134

MAINTENANCE
117
FIGURE 33. INSTALL THE WHEEL IN THE TIRE,
TWO--PIECE WHEEL
11939
STEP1. Install the inner tube and the rubber flap in
the tire. Install both halves of the wheel rim
in the tire. Make sure the stem of the inner
tube is aligned with the slot in the rim.
STEP 2. Tighten the nuts that hold the rim halves to-
gether to 175 Nm (130 lbf ft). Add air pres-
sure to the tire as described in “ Add Air To
The Tires ”.
5. Make sure the rim is the correct size for the tire. Lubri-
cate the part of the wheel that contacts the bead and flap.
6. Install the three--piece or four--piece wheel in the tire as
shown in FIGURE 32. Install the two--piece wheel in the
tire as shown in FIGURE 33.
Add Air To The Tires (See FIGURE 34.)
WARNING
Add air pressure to the tires only in a safety cage.
Inspect the safety cage for damage before use. When
air pressure is added, use a chuck that fastens onto
the valve stem of the inner tube. Make sure there is
enough hose to permit the operator to stand away
from the safety cage when air pressure is added to
the tire.
Do not sit or stand by the safety cage. Do not use a
hammer to try and correct the position of the side
flange or lock ring when the tire has air pressure
greater than 20 kPa (3 psi).
1. Put the tire in a safety cage.
2. Add 20 kPa (3 psi) of air pressure to the tire.
Property of American Airlines