Hyster S40XM, Руководство по эксплуатации

Страница: 59 / 134

OPERATING PROCEDURES
57
BRACE YOUR FEET, AND LEAN FORWARD AND
AWAY FROM THE POINT OF IMPACT.
Before operating in a highway truck or rail car, observe
the following:
S
DO NOT use a lift truck to move a rail car.
S
DO NOT use a lift truck to open or close the door
on a rail car unless the lift truck has an attachment
that is specifically designed for opening and closing
rail car doors and the operator is trained in its use.
S
Check to make sure that the brakes on the highway
truck are set and that wheel blocks have been
placed on both sides of the rear wheels (unless a
dock locking mechanism is engaged). Fixed jacks
may be necessary to support the front and rear of a
highway truck trailer to prevent it from moving or
tipping during loading or unloading.
S
Make sure that the rail car brakes are set and the
wheels are blocked while loading or unloading. Do
this check so that the rail car will not move due to
the movement of the lift truck in and out of the rail
car.
S
Check the condition of the driving surface. Make
sure the floor will support the weight of the lift truck
and the load.
S
Make sure the dock board is secured, in good con-
dition and of the proper capacity.
S
When entering a rail car the operator can enter at
an angle (if the dock plate or bridge is wide
enough). This will reduce the turning required after
entering.
Property of American Airlines