background image

MT 732 EASY 75D ST3B S1

MT 932 EASY 75D ST3B S1

THIS MACHINE IS AN ALL TERRAIN FORKLIFT TRUCK DESIGNED TO OPERATE ON NATURAL OR UNDEVELOPED LAND, OR CONSTRUCTION SITES.

t

 IMPORTANT 

t

This document is a short recap on how to drive a forklift truck, and should in no way be a substitute for the manual required by Directive 2006/42/CE Annex I § 1.7.4, which should be read and 

understood by the operator beforehand and is available in the forklift truck’s cab.  

All instructions, including safety instructions, which are in the manual but are not included in this document should be implemented and enforced.  

The operator must have received proper training and must comply with the rules in force on road traffic.

TECHNICAL CHARACTERISTICS

WEIGHT OF FORKLIFT TRUCK WITH STANDARD ATTACHMENT

(Transport position)

   MT 

732 

MT 

932

 - No load 

 

 

6780 kg 

7145 kg

 - Maximum load 

 

9980 kg 

10345 kg

 - Front axle load 

 

3280 kg 

3445 kg

 - Rear axle load 

 

3500 kg 

3700 kg

 - Front axle maximum load   

8680 kg 

8745 kg

 - Rear axle maximum load   

1300 kg 

1600 kg

DRAWBAR PULL ON THE COUPLING HOOK

 - No load (slipping) 

 

5300 daN 

5530 daN

 - Maximum load (timing transmission) 

8000 daN 

7320 daN

DIMENSIONS

 

MT 732 

MT 932

 - A  1200 mm 

1200 mm

 - B  2810 mm 

2810 mm

 - C  1193 mm 

1128 mm

 - D  4761 mm 

4696 mm

 - F  1930 mm 

1930 mm

 - I  758 mm 

758 mm

 - U1  2299 mm 

2299 mm

 - U2  2488 mm 

2488 mm

B

D

C

A

U1

U2

I

F

CONTROL AND SIGNAL LIGHTS PANEL

CONTROL PANEL

A - ENGINE WATER TEMPERATURE

B - REV COUNTER

C - FUEL LEVEL

D - ENGINE PREHEAT INDICATOR LAMP

E - ENGINE PREHEATING FAULT INDICATOR LIGHT

F- CUT-OFF ENGINE INDICATOR LAMP

G - STEERING SYSTEM OIL PRESSURE WARNING INDICATOR LAMP

H - GEAR BOX OIL PRESSURE WARNING INDICATOR LAMP

I - GEAR BOX OIL TEMPERATURE WARNING INDICATOR LAMP

J - BRAKING OIL LEVEL WARNING INDICATOR LAMP

K - PARKING BRAKE INDICATOR LAMP

L - BATTERY CHARGE WARNING INDICATOR LAMP

M - ENGINE OIL PRESSURE INDICATOR LAMP

N - ENGINE WATER LEVEL WARNING INDICATOR LAMP

O - AIR FILTER OR HYDRAULIC RETURN FILTER CLOGGING WARNING INDICATOR LAMP

P - INDICATOR LIGHTS INDICATOR LAMP

Q - SIDELIGHTS INDICATOR LAMP

R - LOW BEAM INDICATOR LAMP

S - MAIN BEAM INDICATOR LAMP

SCREEN DISPLAY

• Drive direction indicator. 

• The hour meter.

• The clock.

 - Short press button 1 to move successively from one screen to another, hold down 

the button to enter the menus.

B

M N O

G

I

K

S

R

Q

C

P

A

D

F

E

H

J

L

1

SWITCHES

The location of the switches may vary depending on the options.

A -  OPTION Electrical boom pre-equipment 

OPTION Head telescope electrovalve

B - OPTION Blue working headlight

C - Wheel alignment indicator lamps

D - Hazard warning lights

E - Rear fog light

F - Self-cleaning fan option

G - Steering selection

H - Transmission cut-off

N - OPTION  Engine speed regulator

O - Rotating beacon light

P - OPTION Front and rear working headlights

Q - OPTION Hydraulic locking attachment

R - Neutralization of hydraulic movements

S - OPTION  Easy hydraulic attachment connection

T - OPTION Telescope suspension

A

D

C

B

E

H

G

F

N

R

Q

P

O

S T

This device warns the operator of the longitudinal stability 

limits of the forklift. Depending on the type of work 

required, the longitudinal stability limiter and warning 

device allows the operator to operate the lift truck in 

complete safety.

The A8 LED indicates that the forklift truck is at the 

authorized limit for longitudinal stability. If the light comes 

on, perform smooth hydraulic movements.

HANDLING Use with forks.

 “GODET” MODE Use with tipping dumpster. 

ACTIVATION: Hold the button for 2 seconds, the 

“GODET” MODE is confirmed with a beep and 

the indicator light. 

OFF: Press the button again.

 “SUSPENDED LOADS” MODE For more security, use with a bracket 

ACTIVATION: Hold the button for 2 seconds, the “SUSPENDED LOADS” 

MODE is confirmed with a beep and the indicator light. 

OFF: Press the button again.

  A permanently lit fault indicator light, together with a combination  

of illuminated LEDs, indicates a major fault liable to affect the safety of the 

forklift truck. Refer to the manual.

A8

LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE

BASIC INSTRUCTION SHEET No. 52517602EN (2014/10/10)

Reviews: