Hyster A1.3-1.5XNT, Руководство по обслуживанию

Страница: 108 / 124

Figure 57. Minimum Pump Standby Flow Rate
Screen
SCHEDULED MAINTENANCE REMINDER
NOTE:
This submenu is available to logged in
Service Technicians and Supervisors.
This menu item is only visible on trucks equipped
with the Scheduled Maintenance Reminder feature.
The examples shown in Figure 58, Figure 59, and
Figure 60 show the icons for the scheduled mainte-
nance reminder screen.
Using this menu item the user shall be able to ad-
just the scheduled maintenance reminder settings.
The items available to the user are:
• Maintenance Reminders ON/OFF.
• Maintenance Interval in Months.
• Maintenance Interval in Truck Hours.
• Derated Traction Speed Percentage after the
scheduled time has expired.
The maintenance intervals are countdown timers
that are set by the users. Once the user has set the
interval it begins counting down. Each time the
user enters the menu the current count until the
interval will expire will be displayed.
Setting the Maintenance Reminders Status to OFF
deactivates the feature. Setting an Interval to 0 de-
activates that Interval.
With the Maintenance Reminder Status set to ON
and Setting one or both of the reminder intervals to
nonzero numbers activates the maintenance re-
minders feature.
Once a previously active interval counts down to
zero, the maintenance reminder becomes active. To
deactivate the maintenance reminder the user
must either set the status to OFF or enter a new
service interval.
The scheduled maintenance month interval is
based on the system date. The value ranges from 0
to 99 in increments of 1 month.
The scheduled maintenance hour interval is based
on the trucks hour meter. The value ranges from 0
to 9999 in increments of 1 hour.
The derated traction speed percentage setting is a
percentage of the current maximum speed limit. A
setting of 100% has no reduction in top speed while
0% disables the traction system. This value can be
from 0% to 100% in increments of 1%.
When scheduled maintenance reminder interval
has expired, a reminder is activated. If a reminder
is active the system will display the maintenance
reminder alert screen for 5 seconds at key ON.
If the maintenance reminder is not reset or deacti-
vated within 20 hours after the maintenance inter-
val has expired, lift truck operation will be slowed
to the derated traction speed setting on the next
key cycle.
The truck will operate with a reduced traction
speed until the maintenance reminder interval is
set or the feature is turned OFF.
The service technician must reset the scheduled
time for the next maintenance time interval to al-
low normal operation again.
Truck Setup Menu 2200 SRM 1336
102