Hydac FAM 5 FluidAqua Mobil, Инструкция по эксплуатации и техническому обслуживанию

Страница: 61 / 148

Selecting the operating mode
FAM 5
en-US
Page 61 / 148
BEWA FAM5 4166129a en-us 2019-03-04.docx 2019-03-04
Dewater until
OFF: The operating medium is permanently dewatered.
ON : The operating medium is dewatered until the set limit
value for switching off is reached. The FAM then switches
off.
•
Internal AquaSensor AS: Now the test interval starts
(see page 65), the time until the FAM switches back
on. Once this elapses, the FAM automatically
switches back on and runs for a specified minimum
test duration (see page 65). If, after this time, the
limit for switching on:
o
is reached or exceeded after this time, the
FAM will continue to run until the limit value
for switching off is reached once again. The
FAM switches off again and the test interval
runs once more.
o
continues not to be reached, the FAM will
switch off again and the test interval will run
once more.
•
External AquaSensor AS external: The FAM starts
as soon as the limit value for switching on is reached
and stops as soon as the limit value for switching off
is reached.
If Filter until has also been activated, then both limits
values must be reached before the unit switches off.
Switching on Limit value, % saturation for switch-on
This value is only taken into account in operating mode
"
Dewater until ".
Permissible value range: 0 to 99%
Factory setting: 45%
Switching off Limit value, % saturation for switch-off
This value is only taken into account in operating mode
Dewater until ( 2 ).
Permissible value range: 0 to 99%
Factory setting: 30%