Hydac FAM 5 FluidAqua Mobil, Инструкция по эксплуатации и техническому обслуживанию

Страница: 35 / 148

Mode of operation
FAM 5
en-US
Page 35 / 148
BEWA FAM5 4166129a en-us 2019-03-04.docx 2019-03-04
Cleaning in Bypass Flow
The FAM is connected with suction and pressure lines to the tank and cleans
the medium to be found in it in constant bypass flow.
Attach the FAM to the tank which is to be cleaned by means of a suction and
pressure line and switch it on. The permanent bypass purification means you
always get optimum purity results.
Purifying and transferring by pumping
The FAM is connected to the contaminated oil tank with the suction hose and
pumps the fluid into the tank for the purified oil while cleaning it at the same
time.
Connect up the FAM to a contaminated oil tank by means of a suction line
and pump the fluid into the clean oil tank via the FAM.
In order to prevent overfilling, monitor the fluid level in the tank (B)
permanently.
In order to achieve optimum purity results, always operate the
FAM in bypass current after transfer by pumping.