215
MAINTENANCE
Basic machine
OPERATION AND MAINTENANCE INSTRUCTION MANUAL
HBR204-MU-6-eng.doc
THIS DOCUMENT IS THE PROPERTY OF HÜETTE BOHRTECHNIK GMBH - TOTAL OR PARTIAL REPRODUCTION IS PROHIBITED
C5
CHECK OF LEVEL OF OIL IN WINCH REDUCTION GEAR
WINCH (BREVINI BW 1500)
1.
Place the mast in a horizontal position. Unwind the
winch rope to uncover the oil filling and drain plugs.
2.
Clean the plugs and the surface around the plugs
(A-B).
3.
Turn the winch drum to place a plug in the highest
position possible.
4.
Remove the plug and check for oil (A).
5.
Fill as necessary (B).
6.
Clean and refit the plugs (A-B)
WINCH (BREVINI EGO 360 HS) (option)
1.
Place the mast in a horizontal position.
2.
Turn the winch drum so as to align the plugs of the
reduction gear with holes (A, B).
3.
Remove the plug and check for oil (B).
4.
Fill as necessary (A).
WARNING!
Danger of burns!
The reduction gear and the oil inside can reach high
temperatures.
C6
CHECK OF HOSE GUIDE
Check the components of the chain for wear and replace them if necessary;
Check that the hoses are not worn or damaged and replace them as necessary.
5.14
6.13.2
5.4
