![background image](http://html.mh-extra.com/html/hp/procurve-6120g-xg/procurve-6120g-xg_configuration-manual_164578261.webp)
Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
Operating Notes:
■
The following information is displayed for each installed transceiver:
• Port number on which transceiver is installed.
• Type of transceiver.
• Product number—Includes revision letter, such as A, B, or C. If no
revision letter follows a product number, this means that no revision
is available for the transceiver.
• Part number—Allows you to determine the manufacturer for a spec
ified transceiver and revision number.
■
For a non-ProCurve installed transceiver (see line 23 Figure 10-8), no
transceiver type, product number, or part information is displayed. In the
Serial Number field,
non-operational
is displayed instead of a serial num
ber.
■
The following error messages may be displayed for a non-operational
transceiver:
•
Unsupported Transceiver. (SelfTest Err#060)
Check: www.hp.com/rnd/device_help/2_inform for
more info.
•
This switch only supports revision B and above
transceivers. Check: www.hp.com/rnd/device_help/
2_inform for more info.
•
Self test failure.
•
Transceiver type not supported in this port.
•
Transceiver type not supported in this software
version.
•
Not a ProCurve Transceiver. Please go to:
www.hp.com/rnd/device_help/2_inform for more info.
Enabling or Disabling Ports and Configuring Port Mode
You can configure one or more of the following port parameters. Refer to table
10-1 on pages 10-4 through 10-5.
Syntax:
[no] interface
< port-list >
[< disable | enable >]
Disables or enables the port for network traffic. Does not
use the
no
form of the command. (Default:
enable
.)
speed-duplex < auto-10 |10-full | 10-half | 100-full | 100-half |auto| auto
100 | 1000-full >]
10-15
Содержание ProCurve 6120G/XG
