HP ProCurve 6120G/XG, Руководство по настройке, Страница: 233 / 662

Time Protocols
SNTP: Viewing, Selecting, and Configuring
ProCurve(config)# show config
Startup configuration:
.
.
.
timesync sntp
SNTP authentication has been
sntp broadcast
enabled and a key-id of 55 has
been created.
sntp 50
sntp authentication
sntp server priority 1 10.10.10.2 3 key-id 55
sntp server priority 2 fe80::200:24ff:fec8:4ca8 4 key-id 55
.
.
.
Figure 9-17. Example of Configuration File with SNTP Authentication Information
In figure 9-17, the include-credentials command has not been executed and is
not present in the configuration file. The configuration file is subsequently
saved to a TFTP server for later use. The SNTP authentication information is
not saved and is not present in the retrieved configuration file, as shown in
figure 9-18.
ProCurve(config)#copy tftp startup-config 10.2.3.44 config1
.
.
.
Switch reboots...
Startup configuration
.
The sntp authentication line and the key-id s are
.
not displayed. You must reconfigure SNTP
.
authentication.
timesync sntp
sntp broadcast
sntp 50 sntp server priority 1 10.10.10.2 3
sntp server priority 2 fe80::200:24ff:fec8:4ca8 4
.
.
.
Figure 9-18. Example of a Retrieved Configuration File When Include Credentials is not Configured
9-25