HP ProCurve 6120G/XG Скачать руководство пользователя страница 174 | Manualshive

Страница: 174 / 662

HP ProCurve 6120G/XG Скачать руководство пользователя страница 174

Interface Access and System Information

System Information

Time Zone:

The number of minutes your time zone location is to the West (+)

or East (-) of Coordinated Universal Time (formerly GMT). The default

0

means no time zone is configured. For example, the time zone for Berlin,
Germany is + 60 (minutes) and the time zone for Vancouver, Canada is - 480
(minutes).

Daylight Time Rule:

Specifies the daylight savings time rule to apply for your

location. The default is

None

. (For more on this topic, refer to Appendix D,

“Daylight Savings Time on ProCurve Switches.)

Time:

Used in the CLI to specify the time of day, the date, and other system

parameters.

Menu: Viewing and Configuring System Information

To access the system information parameters:

1. From the Main Menu, Select...

2. Switch Configuration...

1. System Information

System Information

Figure 7-7. The System Information Configuration Screen (Default Values)

N o t e

To help simplify administration, it is recommended that you configure

System Name

to a character string that is meaningful within your system.

7-14

«
...
172
173
174
175
176
...
»

Содержание ProCurve 6120G/XG























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов