HP ProCurve 6120G/XG, Руководство по настройке, Страница: 464 / 662

File Transfers
Transferring Switch Configurations
Syntax: show tech custom
Executes the commands found in a custom file instead of the
hard-coded list.
Note : Exit the global config mode (if needed) before executing
show tech commands.
You can include
show tech
commands in the custom file, with the exception
of show tech custom . For example, you can include the command show tech all .
If no custom file is found, a message displays stating “No SHOW-TECH file
found.”
ProCurve# show tech custom
No custom file was uploaded with the copy tftp show-
No SHOW-TECH file found.
tech command
Figure A-10. Example of the show tech custom Command
Xmodem: Copying a Configuration File to a USB Serial
Console Connected PC or UNIX Workstation
To use this method, the switch must be connected via the USB serial console
to a PC or UNIX workstation. You will need to:
■ Determine a filename to use.
■
Know the directory path you will use to store the configuration file.
Syntax: copy < startup-config | running-config > xmodem < pc | unix >
copy config <
filename > xmodem < pc | unix >
Uses Xmodem to copy a designated configuration file from the
switch to a PC or Unix workstation. For more on multiple
configuration files, refer to “Multiple Configuration Files” on
page 6-25.
For example, to copy a configuration file to a PC serially connected to the
switch:
1. Determine the file name and directory location on the PC.
A-28