manualshive.com logo in svg

HP ProCurve 6120G/XG, Руководство по настройке, Страница: 229 / 662

Поделиться
Скачать
HP ProCurve 6120G/XG Скачать руководство пользователя страница 229

Time Protocols 

SNTP: Viewing, Selecting, and Configuring 

<version-num>: 

Specifies the SNTP software version to use, and 

is assigned on a per-server basis. The version setting is 
backwards-compatible. For example, using version 3 means 
that the switch accepts versions 1 through 3. 

Default: 3; range: 1 - 7. 

key-id:

 Optional command. The key identifier (range 1­

4,294,967,295) sent in the SNTP packet. This 

key-id

 will be 

associated with the SNTP server specified in the command. 

ProCurve(config)# sntp server priority 1 10.10.19.5 2 key-id 55 

Figure 9-13. Example of Associating a Key-Id with a Specific Server 

Enabling SNTP Client Authentication 

The 

sntp authentication 

command enables SNTP client authentication on the 

switch. If SNTP authentication is not enabled, SNTP packets are not authen­
ticated. 

Syntax

: 

[no] sntp authentication 

Enables the SNTP client authentication. 

The 

no

 version of the command disables authentication.  

Default: SNTP client authentication is disabled by default. 

Configuring Unicast and Broadcast Mode 

To enable authentication, either unicast or broadcast mode must be config­
ured. When authentication is enabled, changing the mode from unicast to 
broadcast or vice versa is not allowed. You must disable authentication and 
then change the mode. 

9-21 

Содержание ProCurve 6120G/XG























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов