HP ProCurve 6120G/XG, Руководство по настройке, Страница: 543 / 662

Troubleshooting
Using the Event Log for Troubleshooting Switch Problems
D
(debug) is reserved for ProCurve internal diagnostic information.
Date is the date in the format
mm/dd/yy
when an entry is recorded in the log.
Time
is the time in the format hh:mm:ss when an entry is recorded in the log.
Event Number
is the number assigned to an event. You can turn event
numbering on and off with the [
no
]
log-number
command.
System Module
is the internal module (such as “ports:” for port manager) that
generated a log entry. If VLANs are configured, then a VLAN name also appears
for an event that is specific to an individual VLAN. Table C-1 lists the different
system modules with a description of each one.
Event Message is a brief description of the operating event.
Table C-1. Event Log System Modules
System
Module
Description
Documented in ProCurve Hardware/
Software guide
802.1x
addrmgr
auth
cdp
chassis
console
802.1X authentication: Provides access control on a per-client
or per-port basis:
• Client-level security that allows LAN access to 802.1X
clients (up to 32 per port) with valid user credentials
• Port-level security that allows LAN access only on ports on
which a single 802.1X-capable client (supplicant) has
entered valid RADIUS user credentials
Address Table Manager: Manages MAC addresses that the
switch has learned and are stored in the switch’s address
table.
Authorization: A connected client must receive authorization
through web, AMC, RADIUS-based, -based, or
802.1X authentication before it can send traffic to the switch.
Cisco Discovery Protocol: Supports reading CDP packets
received from neighbor devices, enabling a switch to learn
about adjacent CDP devices. ProCurve switches do not
support the transmission of CDP packets to neighbor devices.
Hardware operation, including modules and ports, power
supply, fans, transceivers, CPU interrupt errors, switch
temperature, and so on. Chassis messages include events on
Power Over Ethernet (POE) operation.
Console interface used to monitor switch and port status,
reconfigure the switch, read the event log through an in-band
Telnet or out-of-band connection.
Access Security Guide
Management and Configuration Guide
Access Security Guide
Management and Configuration Guide
Installation Guides
Management and Configuration Guide
Installation and Getting Started Guide
C-25