HP ProCurve 6120G/XG, Руководство по настройке

Страница: 237 / 662

Time Protocols
TimeP: Viewing, Selecting, and Configuring
==========================- CONSOLE - MANAGER MODE -==========================
Switch Configuration - System Information
System Name : ProCurve
System Contact :
System Location :
Inactivity Timeout (min) [0] : 0 MAC Age Time (sec) [300] : 300
Inbound Telnet Enabled [Yes] : Yes Web Agent Enabled [Yes] : Yes
Time Sync Method [None] : TIMEP
TimeP Mode [Disabled] : Disabled
Time Protocol Selection Parameter
Tftp-enable [Yes] : Yes
– TIMEP (the default)
Time Zone [0] : 0
– SNTP
Daylight Time Rule [None] : None
– None
Actions-> Cancel Edit Save Help
Figure 9-20. The System Information Screen (Default Values)
Press
[E]
(for
Edit
). The cursor moves to the
System Name
field.
2. Use
[v]
to move the cursor to the
Time Sync Method
field.
3. If
TIMEP
is not already selected, use the Space bar to select TIMEP , then
press
[v]
once to display and move to the
TimeP Mode
field.
4. Do one of the following:
• Use the Space bar to select the DHCP mode, then press
[v]
to move
the cursor to the
Poll Interval
field, and go to step 6.
• Use the Space bar to select the Manual mode.
i. Press
[>]
to move the cursor to the
Server Address
field.
ii. Enter the IP address of the TimeP server you want the switch to
use for time synchronization.
Note: This step replaces any previously configured TimeP server
IP address.
iii. Press
[>]
to move the cursor to the
Poll Interval
field, then go to
step 6.
9-29