Chapter 6
Replacing Parts
85
ZIF
Lever
Terminator
Processor
Socket
Removing the Terminator
NOTE
Retain the terminator for future use. The Netserver will not operate properly if using
only one processor with no terminator installed in the second processor socket.
9. Lift the terminator out of the socket and place it on anti-static surface or bag.
10. Align the second processor over the empty processor socket.
The socket has a triangle marking for pin-1 that should match the triangle for pin-1 on the
processor near the end of the ZIF lever.
CAUTION
Ensure you the align pin-1 of the processor with pin-1 of the processor socket or pin
damage will occur.
11. Insert the second processor into the socket and close the ZIF lever to fully seat the processor.
You should hear the ZIF lever click when it closes properly.