•
SNMP Trap Notification Filter — the types of events for which the device should send SNMP
traps.
•
IPv4 or IPv6 Management Station — IP address of the Command View TL management
station. Only one management station can be configured. If both IPv4 and IPv6 IP addresses
are provided, only the IPv4 address will be used
Configuring HPE Systems Insight Manager for the tape library
The library uses the HPE NetCitizen MIB, which is supported by HPE Systems Insight Manager
(SIM) and many other applications. To detect the library using a remote management application,
such as HPE SIM, you must first add the IP address for the management system as an SNMP
target using the network configuration. SNMP queries are only accepted from configured targets.
To configure the library for use with HPE SIM:
1.
From the RMI, add the HPE SIM management station as an SNMP target.
2.
If the library IP address is in an HPE SIM automatic discovery IP address list, the SIM
management station will detect the library at the next scheduled scan.
To configure HPE SIM for manual discovery:
1.
In the HPE SIM toolbar, click
Options > Discovery
.
2.
Click the
Manual
tab.
3.
Enter the library's IP address or system name.
SIM 5.1 will automatically detect the system type and product name.
To manually identify the library with SIM 5.0 and older:
1.
In the HPE SIM
System and Event Collections
pane, click
Systems by Type
.
2.
In the
Systems by Type
pane, click
All systems
.
3.
Click the link with the IP address or name of the tape library.
4.
Click the
Tools & Links
tab.
5.
Click
Edit System Properties
.
6.
Set
System Type
to
Tape Library
.
7.
Enter the
Product Model
of your tape library.
8.
Click
OK
.
Changing the administrator password
Use the
Configuration > Password page
to change the administrator password for the RMI and
OCP.
NOTE:
You must set the administrator password with the OCP before you can access
administrator functionality in the RMI. For MSL2024, see
Changing the administrator password
(Configuration > Change Admin Password) (page 96)
. For MSL4048, MSL8048, and MSL8096,
see
Changing the administrator password (Configuration > Set Admin Password) (page 124)
.
Using the RMI
77
