Troubleshooting
Table D-3: Server Does Not Have Video
WARNING: To reduce the risk of electric shock or damage
to the equipment, before opening access panels to reseat
components, power down the server and disconnect the
power cord.
Possible Reasons
The Next Step
If an optional video card was
installed, the monitor cable may not
be correctly connected.
The monitor may not be properly
connected.
1. Be sure that the monitor has
power and that the monitor
cable is securely connected. If
more than one video adapter is
installed, be sure that the
monitor is connected to the
correct video card.
2. Be sure that the monitor is
functional by connecting it to a
known working server.
3. Power down the server. Reseat
all cards and memory modules,
and verify all cable
connections.
4. Refer to Chapter 3 for bezel
and side panel removal.
5. Restart the server.
6. Listen for audible indicators,
such as a series of beeps. A
series of beeps indicates the
presence of a Power-On
Self-Test (POST) error
message.
Refer to the
Servers
Troubleshooting Guide
for a
complete listing of possible POST
error messages.
continued
D-8
HP ProLiant ML350 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: j-appd Troubleshooting.doc
Codename: Steel Venom Part Number: 316354-001 Last Saved On: 12/9/02 8:30 AM
