Overview of Server Installation
Installing the Mounting Bracket Slide Assembly
The mounting bracket slide assemblies are labeled with the correct positioning in the
rack. The labels will read “Front-Left,” “Back-Left,”,“Front-Right,” and
“Back-Right.”
To install the mounting bracket slide assembly:
1.
Select the appropriate slide assembly, matching the position label on the slide
with the side being installed. The slide assembly as shown in Figure 2-9 would
be labeled “Front – Right” on the inside front surface.
2.
Position the mounting bracket according to the pencil marks made with the
template earlier, extending the slide assembly to fit the rack (1).
3.
Secure the front of the mounting bracket first, inserting the mounting tabs into
position and pushing down until the locking latch engages (2).
4.
Secure the back of the mounting bracket (would be marked “Back – Right” in
Figure 2-9 example) by inserting the mounting tabs into the rack and pushing
down until the locking latch engages (3).
NOTE:
Be sure that the mounting bracket is level from front to back.
2
3
1
Figure 2-9: Securing the mounting bracket slide
assembly to the rack
HP ProLiant ML350 Generation 3 Server Setup and Installation Guide
2-19
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: c-ch2 Overview of Server Installation.doc
Codename: Steel Venom Part Number: 316354-001 Last Saved On: 12/6/02 2:56 PM
