LED Indicators, Switches, and Jumpers
Resetting System Configuration Settings
It may be necessary at some time to clear and reset system configuration settings.
When the system configuration switch position 6 is set to the
on
position, the system
is prepared to erase all system configuration settings from both CMOS and NVRAM.
To reset the system configuration settings:
IMPORTANT:
Clearing nonvolatile RAM (NVRAM) deletes your configuration information.
Refer to Chapter 5 for complete instructions on configuring the server.
1.
Power down the server.
2.
Set the system configuration switch position 6 to the
on
position.
3.
Power up the server.
All configuration settings are now erased and all system operations halt.
4.
Power down the server.
5.
Reset the position 6 switch to the default
off
position.
6.
Power up the server.
7.
Reset all system configuration settings.
Refer to Chapter 5, “Server Configuration and Utilities,” or the
ROM-Based Setup
Utility User Guide
found on the server documentation CD, for more information on
RBSU.
E-12
HP ProLiant ML350 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: k-appe LED Indicators, Switches, and Jumpers.doc
Codename: Steel Venom Part Number: 316354-001 Last Saved On: 12/9/02 8:37 AM
