HP HP 8753E, Руководство пользователя, Страница: 661 / 699

VAR_LIST_BEGIN VAR_LIST_BEGIN indicates that a list of the values for the independent
variable (declared in the VAR statement) follow. Only the MAG format
is supported in revision
VAR_LIST_END
the end of a list of values for the independent
variable.
DATA DATA S 1] RI defines the name of an array of data that will be read
later in the current package, and the format that the data will
be in. Multiple arrays of data are supported by using standard array
indexing. Versions and of support the
ray indexes. RI (real-and imaginary) format, and a of two
Commonly used array names include the following:
for parameter” Example:
“E” for “Error term” Example: E[
“USER” for “User parameter” Example:
1
CONSTANT
Example:
for a ratio of two Example:
voltages (AR).
CONSTANT
[value] allows for the recording of values which
don’t change when the independent variable changes.
are part of the main definition. Users must not
their own Use the #KEYWORD device specification
to create your own KEYWORD instead. The #NA device specification is
an example of this.
No constants were
for revision of
revision the following constant:
CONSTANT TIME [year] [month] [day] [hour] [min]
Example:
C O M M E N T
SECONDS
CONSTANT 1991 02 26 17 33 53.25
The COMMENT statement is not absolutely required, but is highly
recommended to aid readability.
n
The year should always be the full four digits 1991” is correct, but
“91” is not). is to avoid problems with the year 2000, when the
shortened version of the year will be “00.”
n
The hour value should be in “military” time.
n
When writing a and the fractional seconds value is zero, then
the “seconds” value may be printed either with or without a decimal
point: either “47.0” or “47” would be acceptable. When reading
a the seconds value should always be read as if it were a
floating point number.
The Data Format and Keyword Reference