manualshive.com logo in svg

HP HP 8753E, Руководство пользователя, Страница: 472 / 699

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 472

Display Pixel Integrity

Red, Green, or Blue Pixels 

Red, green, or blue “stuck on” pixels may appear against a black background. In a properly
working display, the following will not occur:

n 

complete rows or columns of stuck pixels

n 

more 

 5 stuck pixels (not to exceed a maximum of 2 red or blue, and 3 green)

n 

2 or more consecutive stuck pixels

n 

stuck pixels less than 6.5 mm apart

Dark Pixels Specifications

Dark “stuck on” pixels may appear against a white background. In a properly working
display, the following will not occur:

n 

more than 12 stuck pixels (not to exceed a maximum of 7 red, green, or blue)

n 

more than one occurance of 2 consecutive stuck pixels

n 

stuck pixels less than 6.5 mm apart

This connector 

 communication with compatible devices including external controllers,

printers, plotters, disk drives, and power meters.

Parallel Port

This connector is used with parallel (or Centronics interface) peripherals such as printers
and plotters. It can also be used as a general purpose I/O port, with control provided by test
sequencing functions

This connector is used with serial peripherals such as printers and plotters.

Mini-DIN Keyboard

This connector is used for an optional keyboard for titles and remote front-panel operation.

Line Power

47 to 66 Hz

115 V nominal (90 V to 132   or 230 V nominal (198 V to 265 

 350 VA max.

Specifications and Measurement Uncertainties

Содержание HP 8753E




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов