manualshive.com logo in svg

HP HP 8753E, Руководство пользователя, Страница: 622 / 699

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 622

n 

HP 

 DeskJet 

 (can also be used to plot)

n 

HP 

 DeskJet 

 (can also be used to plot)

n 

 LaserJets (can also be used to plot)

n 

HP 

 

n 

HP 

 

n 

HP 

 

 Color Graphics Printer

Epson printers which are compatible with the Epson 

 printer control language, such

as the 

 are also supported by the analyzer. Older Epson printers, however, such as the

 will not work with the analyzer.

Mass Storage

The analyzer has the capability of storing instrument states directly to its internal memory,
to an internal disk drive, or to an external 

 drive. The internal 3.5 inch floppy disk can

be initialized in both 

 and DOS formats and is capable of 

 and writing data in both

formats. Using the internal disk drive is the preferred method, but the capability to use
external disk drives still exists. Most external disks using 

 protocol are compatible.

Note 

The analyzer does not support the 

 (hierarchy 

 system) directory

format.

Caution 

Do not use the older single-sided disks in the analyzer’s internal drive.

HP-IB Cables

An HP-IB cable is required for interfacing the analyzer with a plotter, printer, external disk
drive, or computer. The cables available are:

n 

HP 

 HP-IB Cable, 1.0 m (3.3 ft.)

n 

HP 

 HP-IB Cable, 2.0 m (6.6 ft.)

n 

HP 

 HP-IB Cable, 0.5 m (1.6 ft.)

Interface Cables

n 

HP 

 Centronics (Parallel) Interface Cable, 3.0 

m (9.9 

ft.)

n 

HP 

 

 Interface Cable, 1.2 m (3.9 ft.)

n 

HP 

 Serial Interface Cable, 1.2 m (3.9 ft.)

n 

HP 24542G Serial Interface Cable, 3 m (9.9 ft.)

n 

HP 

 Parallel Interface Cable, 2 m (6 ft.)

n 

HP 

 Parallel Interface Cable, 2 m (6 ft.)

Compatible Peripherals 

Содержание HP 8753E




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов