HP HP 8753E, Руководство пользователя, Страница: 646 / 699

I, P,
Instrument
Four-channel instrument state
G Graphics 1 Display graphics
0 index
D Error corrected data 1 Channel 1
2 Channel 2
a Channel 3
4 Channel 4
Raw data 1 to 4 Channel 113, raw arrays 1
5 to 8 Channel raw arrays 6 to 8
Formatted data 1 Channel 1
2 Channel 2
8 Channel 3
4 Channel 4
Cal
Cal data, channel 1 0
state
A 10
B 11
C Cuefiicient 12
Cal data, channel 2
Memory trace data 1 Channel 1
2 Channel 2
Channel 3
4 Channel 4
Error corrected data 1 Channel 1
2 Channel 2
1 These are two-channel instrument states readable by previous versions.
2 Piles through will be saved if a full two-port calibration is active. If a full two-port
12-2. Character Definitions
calibration is not active only be saved for Channel 1 and 3, and for Channel 2 and
4.
3 These are written only when a error correction (full or TRL) been
applied.
If correction is on at the time of an external store, the calibration set is stored to disk. (Note
that inactive calibrations are not stored to disk.) When an instrument state is loaded into the
analyzer from disk, the stimulus and response parameters are restored first. If correction is on
for the loaded state, the analyzer will load a calibration set from disk that carries the same title
as the one stored for the instrument state.
Preset
State
and Memory Allocation 124