HP HP 8753E, Руководство пользователя, Страница: 370 / 699

6-6. Class Assignments
Calibration Kit
Disk File Name:
The number of standard classes required depends on the type of calibration being performed,
and is identical to the number of error terms corrected. A response calibration requires only
one class, and the standards for that class may include an open, or short, or thru. A l-port
calibration requires three classes. A full calibration requires 10 classes, not including two
for isolation.
The number of standards that can be assigned to a given class may vary from none (class not
used) to one (simplest class) to seven. When a certain class of standards is required during
calibration, the analyzer will display the labels for all the standards in that class (except when
the class consists of a single standard). This does not, however, mean that all standards in a
class must be measured during calibration. Unless band-limited standards are used, only a
single standard per class is required.
Note
It is often to keep the number of standards per class to the bare
needed (often one) to avoid confusion during calibration.
Application and Operation Concepts