HP HP 8753E, Руководство пользователя, Страница: 124 / 699

Changing the Sequence Title
If you are storing sequences on a disk, you should replace the default titles . . .
1.
2.
3.
To select a sequence that you want to retitle, press:
and select the particular sequence
. . . . .
The analyzer shows the available title characters. The current title is displayed in the
upper-left corner of the screen.
You can create a new filename in two ways:
n
If you have an attached DIN keyboard, you can press and then type the new lilename.
. If you do not have an attached DIN keyboard, press and turn the front
. . . . . . . . . . .
. . . . . . . . . .
panel knob to point to the characters of the
new pressing as
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
you stop at each character.
The analyzer cannot accept a title name) that is longer than eight characters. Your titles
must also begin with a letter, and contain only letters and numbers.
complete the titling, press
Naming Files Generated by a Sequence
The analyzer can automatically increment the name of a that is generated by a sequence
using a loop structure. (See example “Generating Piles in a Loop Counter Example Sequence”
later in this chapter.)
To access the sequence
menu, press:
This menu presents two choices:
. .
the Title Pile Menu.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..A...... .. . . . . . . .. . . . . . . . . . . . . . .
This also brings up the Title Pile Menu.
The above keys show the current filename in the line of the
When titling a for use in a loop function, you are restricted to only 2 characters in the
lllename due to the 6 character length of the loop counter keyword [LOOP]. When the is
actually written, the keyword is expanded to only 5 ASCII characters (digits), resulting
in a 7 character
After entering the 2 character fllename, press:
Making Measurements