HP HP 8753E, Руководство пользователя, Страница: 365 / 699

4. Store the modified calibration kit.
For a step by step procedure on how to modify calibration kits, refer to “Modifying Calibration
Kit Standards” located in Chapter 5, Measurement Results.
Modify Calibration Kit Menu
. .
menu. This leads in turn to additional series of menus associated with modifying calibration
kits The following is a description of the located within this menu:
n
makes the standard number the active function, and brings up the
. . . . . . . . .
. . . . .
standard menus. Before selecting a standard, a standard number must be entered.
This number (1 to is an arbitrary reference number used to reference standards while
specifying a class. The standard numbers for the calibration kits are as follows:
1 short(m)
2
open(m)
3 broadband load
4 t h r u
5
sliding load
6 load
7
short(f)
Note
Although the numbering sequences are arbitrary, confusion can be
by using consistency. However, standard 5 is always a sliding load.
key to specify a class to group certain standards
. . . .. . . . . . . . . . . . . . . . . . . .
leads to the label class menu, to give the class a label for future
reference.
. .
leads to a menu for constructing a label for the user-modified kit. If a label
is supplied, it will appear as one of the five choices in the select kit menu. The
approach is similar to a display title, except that the kit label is limited to ten
characters.
standards are and all classes are specified. Be sure to save the kit with the
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
......... . . . . . . . . ..... . . . ....
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Application and Operation Concepts