manualshive.com logo in svg

HP HP 8753E, Руководство пользователя, Страница: 335 / 699

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 335

Markers

The 

 key displays a movable active marker on the screen and provides access to a

series of menus to control up to five display markers for each channel. Markers are used to

obtain numerical readings of measured values. They also provide capabilities for reducing

measurement time by changing stimulus parameters, searching the trace for specific values, or

statistically analyzing part or all of the trace. Figure 6-28 illustrates the displayed trace with all

markers on and marker 2 the active marker.

 

l o g   M A G

 

R E F   - 5 0  

  - 2 3 . 6 8 9  

C E N T E R

1 3 4 . 0 0 0   0 0 0  

S P A N

5 0 . 0 0 0   0 0 0  

 6-28. 

 on Trace

Markers have a stimulus value (the x-axis value in a Cartesian format) and a response value

(the y-axis value in a Cartesian format). In a polar or Smith chart format, the second part of a

complex data pair is also provided as an auxiliary response value. When a marker is activated

and no other function is active, its stimulus value is displayed in the active entry area and can

be controlled with the knob, the step keys, or the numeric keypad. The active marker can be

moved to any point on the trace, and its response and stimulus values are displayed at the top

right comer of the graticule for each displayed channel, in units appropriate to the display

format. The displayed marker response values are valid even when the measured data is above

or below the range displayed on the graticule.

Marker values are normally continuous: that is, they are interpolated between measured

points.   they can be set to read only discrete measured points. The markers for the four

channels normally have the same stimulus values, or they can be uncoupled so that each

channel has independent markers, regardless of whether stimulus values are coupled or dual

channel display is on.

If both data and memory are displayed, the marker values apply to the data trace. If only

memory is displayed, the marker values apply to the memory trace. In a memory math display

(data/memory or data-memory), the marker values apply to the trace resulting from the

memory math function.

Application and Operation Concepts

Содержание HP 8753E




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов