manualshive.com logo in svg

HP HP 8753E, Руководство пользователя, Страница: 316 / 699

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 316

 

Figure 6-14. Standard and Inverse Smith Chart Formats

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

corresponds to a particular value of both magnitude and phase. Quantities are read vectorally:

the magnitude at any point is determined by its displacement from the center (which has zero

value), and the phase by the angle counterclockwise from the positive x-axis. Magnitude is

scaled in a linear fashion, with the 

 of the outer circle usually set to a ratio 

 of 1.

Since there is no frequency axis, frequency information is read from the markers.
The default marker readout for the polar format is in linear magnitude and phase. A log

magnitude marker and a 

 marker are available in the polar marker menu.

 

 

Figure 6-15. Polar Format

Application and Operation Concepts 635

Содержание HP 8753E




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов