manualshive.com logo in svg

HP HP 8753E, Руководство пользователя, Страница: 136 / 699

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 136

8. To

 access the gate function menu, press:

9.

10.

11.

To set the gate parameters, by entering the marker value, press:

 

 or turn the front panel knob to position the 

“T” 

center gate marker.

 set the gate span, press:

 (1.2) 

 or turn the front panel knob to position the “flag” gate markers.

 activate the gating function to remove any unwanted responses, press:

 

As shown in Figure 2-60, only response from the main path is displayed.

Note 

You may remove the displayed response from inside the gate markers by

pressing 

 and turning the front panel knob to exchange the “flag” marker

 

positions

Gating

Figure 2-60.

a Time Domain Transmission Example Measurement

 To adjust the gate shape for the best possible time domain response, press 

 and

 

select between minimum, normal, wide, and maximum. Each gate has a different 

flatness, cutoff rate, and 

 levels.

 Measurements 

Содержание HP 8753E




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов