manualshive.com logo in svg

HP HP 8753E, Руководство пользователя, Страница: 330 / 699

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 330

Setting Default Colors

 

To set all the display elements to the factory-defined default colors, press   . .

Note

 does not reset or change colors to the default color values. However,

cycling power to the instrument will reset the colors to the default color

values.

Blanking the Display

. . . ...) 

Pressing 

 switches off the analyzer display while leaving the instrument in

    ii

its current measurement state. This feature may be helpful in prolonging the life of the LCD

in applications where the analyzer is left unattended (such as in an automated test system).

Turning the front panel knob or pressing any front panel key will restore normal display

operation.

Saving 

 Colors

 save a modified color set, press 

 

 Modified colors are not part of a saved

 .   

instrument state and are lost unless saved using these softkeys.

The Modify Colors Menu

. . . 

 

 

 

 

 

 

 

 

 

 

: . . . . . . ... 

 

 

   

colors menu.
The modify colors menu allows you to adjust the colors on your analyzer’s display. The default

colors in this instrument have been scientifically chosen to maximize your ability to discern the

difference between the colors, and to comfortably and effectively view the colors. These colors

are recommended for normal use because they will provide a suitable contrast that is easy to

view for long periods of time.
You may choose to change the default colors to suit environmental needs, individual

preferences, or to accommodate color deficient vision. You can use any of the available colors

for any of the twelve display elements listed by the 

 names below:

Application and Operation Concepts 6 4 6

Содержание HP 8753E




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов