manualshive.com logo in svg

HP HP 8753E, Руководство пользователя, Страница: 495 / 699

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 495

           

 

   

             

 

 

   

measures the absolute power amplitude at input B.

calculates and displays the complex ratio of input B to input R.

deletes the last character entered.

sets the background intensity of the LCD as a percent of white.

The factory-set default 

 is stored in non-volatile memory.

(Option 010 only) sets the time-domain 

 mode.

toggles an annunciator which sounds to indicate completion of
certain operations such as calibration or instrument state save.

turns the limit fail beeper on or off. When limit testing is on
and the fail beeper is on, a beep is sounded each time a limit
test is performed and a 

 detected. The limit fail beeper is

independent of the warning beeper and the operation complete
beeper.

toggles the warning annunciator. When the annunciator is on it
sounds a warning when a cautionary message is displayed.

switches off the analyzer’s display. This feature may be helpful
in prolonging the life of the LCD in applications where the
analyzer is left unattended (such as in an automated test
system). Pressing any front panel key will restore the default
display operation.

adjusts the brightness of the color being modified. See Adjusting
Color for an explanation of using this 

 for color

modification of display attributes.

is used to enter the CO term in the definition of an OPEN
standard in a calibration kit, which is the constant term of the
cubic polynomial and is scaled by 

is used to enter the Cl term, expressed in 

 (Farads/Hz) and

scaled by 

is used to enter the 

 term, expressed in 

 and scaled by

is used to enter the 

 term, expressed in 

 and scaled by

key leads to a series of menus to perform measurement

calibrations for vector error correction (accuracy enhancement),

 . . . . . . . 

 . . . . . . . . . . . . 

 

 

 

 

 

 

 

 

key 

 leads to 

 which activate interpolated error

correction and power meter calibration.

accepts a power sensor calibration factor % for the segment.

brings up the segment modify menu and segment edit
(calibration factor menu) which allows you to enter a power
sensor’s calibration factors. The calibration factor data entered
in this menu will be stored for power sensor A.

sets the preset state of interpolated error-correction on or off.

 Key Definitions

Содержание HP 8753E




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов