manualshive.com logo in svg

HP HP 8753E, Руководство пользователя, Страница: 621 / 699

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 621

System Accessories Available

System Cabinet

The HP 

 system cabinet is designed to rack mount the analyzer in a system

configuration. The 132 cm (52 in) system cabinet includes a bookcase, a drawer, and a
convenient work surface.

System 

The HP 

 system testmobile is designed to provide mobility for instruments, test systems,

and work stations. This system testmobile can hold units up to 

 (24 in) deep and has a

load capacity of up to 90 kg (200 lbs) on the tilt tray and 227 kg (500 lbs) total.

Plotters and Printers

The analyzer is capable of plotting or printing displayed measurement results directly (without
the use of an external computer) to a compatible peripheral. The 

 supports HP-IB,

serial, and parallel peripherals. Most Hewlett-Packard desktop printers and plotters are
compatible with the analyzer. Some common compatible peripherals are listed here (some are
no longer available for purchase but are listed here for your reference):

These plotters are compatible:

n 

HP 

 

 

 Color Graphics Plotter

n 

HP 

 Two-Pen Graphics Plotter

n 

HP 

 Six-Pen Graphics Plotter

 HP 

 High-Speed Eight-Pen Graphics Plotter

These printers are compatible:

n 

HP 

 DeskJet Portable 310

n 

HP 

 DeskJet Portable 320

n 

HP 

 DeskJet Portable 340

n 

HP 

 DeskJet 400

n 

HP 

 DeskJet 500

n 

HP 

 DeskJet 

 HP 

 DeskJet 520

n 

HP 

 DeskJet 540

 HP 

 DeskJet 

n 

HP 

 DeskJet 

n 

HP 

 DeskJet 600

n 

HP 

 DeskJet 

n 

HP 

 DeskJet 

n 

HP 

 DeskJet 

n 

HP 

 DeskJet 

114 Compatible Peripherals

Содержание HP 8753E




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов