HP HP 8753E Скачать руководство пользователя страница 292

Страница: 292 / 699

[ Entry Off]

You can use this key to clear and turn off the active entry area, as well as any displayed

prompts, error messages, or warnings. Use this function to clear the display before printing or

plotting. This key also helps prevent changing active values accidentally by moving the knob.

The backspace key has two main functions:

Deletes or modifies entries

Hides the

or Deleting Entries

You can use the backspace key to delete the last entry, or the last digit entered from the

numeric keypad. You can also use this key in one of two ways for modifying a test sequence:

deleting a single-key command that you may have pressed by mistake (for example

. . . . .

deleting the last digit in a series of digits that you may have input, as long as you haven’t yet

pressed a terminator (for example if you pressed

but did not press

etc)

Turning off the

The

key can also be used to move marker information off of the graticules and into the

menu area. The

menu is turned off in this mode.

This function is useful when marker information obscures the display trace and you wish to see

the display traces more clearly.
This is a toggle function: repeatedly pressing

alternately hides the

menu and

makes it reappear If two or more markers are on, marker annotation will move off of the

graticules and into the

menu area when the menu is hidden. Pressing

or a

which opens a menu, or any

restores the

menu and moves marker

annotation back onto the graticules.

You can use this key to add a decimal point to the number you entered.

You can use this key to add a minus sign to the number you entered.

Application and Operation Concepts

Содержание HP 8753E




























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание HP 8753E

Отзывы:

HP HP 8753E, Руководство пользователя, Страница: 292 / 699

Результаты поиска

Содержание HP 8753E

Отзывы: