manualshive.com logo in svg

HP HP 8753E, Руководство пользователя, Страница: 199 / 699

Поделиться
Скачать
HP HP 8753E Скачать руководство пользователя страница 199

 Output the Plot Files

n 

You can plot the 

 to a plotter from a personal computer.

n 

You can output your plot files to an HPGL compatible printer, by following the sequence

in “Outputting Plot Files from a PC to an HPGL Compatible Printer” located later in this
chapter.

 You can 

 a program that plots all of the files, with the root filename of PLOT, to an

HPGL compatible printer. This program is provided on the “Example Programs Disk” that is
included in the 

HP 

 Network 

 Programmer’s Guide. 

However, this program is

for use with LIF formatted disks and is written in HP BASIC.

To View Plot Files on a PC

Plot 

 can be viewed and manipulated on a PC using a word processor or graphics

presentation program. Plot files contain a text stream of HPGL (Hewlett-Packard Graphics
Language) commands In order to import a plot 

 into an application, that application 

must

have an import 

 for HPGL (often times call HGL). Two such applications from the Lotus

suite of products are the word processor 

 and the graphics presentation package

“Freelance Graphics. 

Note

Lotus applications are not supported by Hewlett-Packard. The following
procedures are provided for informational use only. Other applications or other
versions of the same application may function differently.

When viewed in such programs, the color and font size of the plot may vary from the output
of an 

 compatible color printer. The following table shows the differences between

the color assignments of 

 compatible printers and Lotus applications. Also refer to

“Selecting Pen Numbers and Colors” located earlier in this chapter.

 Printer Lotus Applications

Color Pen Color

No. No.

0

 

1

 

1 black

(red-violet)

blue

yellow

green

red

black

red

yellow

blue

red-violet

 modify the color or font size, consult the documentation for the particular application being

used.

Printing, Platting, and Saving Measurement Results

Содержание HP 8753E




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов