HP AE370A - Brocade 4Gb SAN Switch 4/12, Руководство администратора

Страница: 76 / 447

76 Managing user accounts
How to enable and disable a RADIUS server
1. Connect to the switch and log in as admin.
2. Enter this command to enable local:
Local is used if the user authentication fails on the RADIUS server. Or to enable localbackup:
.Local is used if the RADIUS servers are not accessible.
How to delete a RADIUS server from the configuration
1. Connect to the switch and log in as admin.
2. Enter this command:
3. At the prompt, enter y to complete the command.
When the command succeeds, the event log indicates that the server is removed.
How to change a RADIUS server configuration
1. Connect to the switch and log in as admin.
2. Enter this command:
How to change the order in which RADIUS servers are contacted for service
1. Connect to the switch and log in as
admin
.
2. Enter this command:
When the command succeeds, the event log indicates that a server configuration is changed.
switch:admin> aaaconfig --radiuslocal
switch:admin> aaaconfig --radiuslocalbackup
switch:admin> aaaConfig --remove
server
| all
server
Servers are listed by either name or IP address. Enter either the name or IP
address of the server to be removed.
switch:admin> aaaConfig --change
server
[ -p
port
] [ -s
secret
] [ -t
timeout
] [ -a pap
| chap ]
server
Servers are listed by either name or IP address. Enter either the name or IP
address of the server to be changed.
-p port
Optionally, enter a server port.
-s secret
Optionally, enter a shared secret.
-t timeout
Optionally, enter the length of time (in seconds) the server has to respond
before the next server is contacted.
-a[pap|cha
p]
Specify PAP or CHAP as authentication protocol.
switch:admin> aaaConfig --move
server to_position
server
Servers are listed by either name or IP address. Enter either the name or IP
address of the server whose position is to be changed.
to_positio
n
Enter the position number to which the server is to be moved.