HP AE370A - Brocade 4Gb SAN Switch 4/12, Руководство администратора

Страница: 288 / 447

288 Troubleshooting
Table 59 summarizes commands that are useful for debugging zoning issues.
Refer to ” Administering Advanced Zoning ” on page 343 for additional information about setting up
zoning properly. Also refer to the Fabric OS Command Reference Manual for details about zoning
commands.
To correct a fabric merge problem quickly
You can correct zone conflicts by using the
cfgClear
command to clear the zoning database.
CAUTION: This is a disruptive procedure.
1. Determine which switch(es) have the incorrect zoning configuration; then, log in to the switches
as admin.
2. Enter the
switchDisable
command.
3. Enter the
cfgDisable
command.
4. Enter the
cfgClear
command.
CAUTION: This command clears the zoning database on the affected switches.
5. Enter the
switchEnable
command. This forces a zone merge and populates the switches with the
desired zoning database. The two fabrics will be merged again.
To correct a merge conflict without disrupting the fabric, first verify fabric merge problem, then edit
zone configuration members, and then reorder the zone member list.
To verify a fabric merge problem
1. Enter the
switchShow
command to validate that the segmentation is due to a zone issue.
2. Refer to Table 58 to view the different types of zone discrepancies.
Table 59 Commands for debugging zoning
Command Function
aliCreate
Use to create a zone alias.
aliDelete
Use to delete a zone alias.
cfgCreate
Use to create a zone configuration.
cfgShow
Displays zoning configuration.
defZone
Sets the default zone access mode to No Access , initializes a zoning transaction
(if one is not already in progress), and creates the reserved zoning objects.
licenseShow
Displays current license keys and associated (licensed) products.
switchShow
Displays currently enabled configuration and any E_Port segmentations due to
zone conflicts.
zoneAdd
Use to add a member to an existing zone.
zoneCreate
Use to create a zone. Before a zone becomes active, the
cfgSave
and
cfgEnable
commands must be used.
zoneHelp
Displays help information for zone commands.
zoneShow
Displays zone information.