80
Syntax
display mpls route-state
[
vpn-instance
vpn-instance-name
] [
dest-addr mask-length
]
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance
vpn-instance-name
: Displays the LSP information of the routes of a VPN instance.
vpn-
instance-name
is the VPN instance name, which is a case-sensitive string of 1 to 31 characters.
dest-addr mask-length
: Displays the LSP information of routes to a destination address.
dest-addr
is the
destination IP address. The mask length is ranging from 0 to 32.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide
.
•
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
•
exclude
: Displays all lines that do not match the specified regular expression.
•
include
: Displays all lines that match the specified regular expression.
•
regular-expression
: Specifies a regular expression, which is a case-sensitive string of 1 to 256
characters.
Examples
# Display LSP-related information about all routes.
<Sysname> display mpls route-state
DEST/MASK NEXT-HOP OUT-INTERFACE STATE LSP-COUNT VPN-INDEX
-----------------------------------------------------------------
1.1.1.1/32 10.0.0.1 Vlan2 ESTA 1 0
Table 39
Command output
Field Description
LSP-COUNT
Number of LSPs established based on this route
VPN-INDEX
Index number of the VPN instance
display mpls static-lsp
Description
Use the
display mpls static-lsp
command to display information about a specific static LSP or all static
LSPs.
Related commands:
display mpls lsp
and
display mpls statistics lsp
.
Syntax
display mpls static-lsp
[
lsp-name
lsp-name
] [ {
exclude
|
include
}
dest-addr
mask-length
] [
verbose
]
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
