140
display mpls static-cr-lsp
Description
Use the
display mpls static-cr-lsp
command to display information about static CR-LSPs.
Syntax
display mpls static-cr-lsp
[
lsp-name
lsp-name
] [ {
include
|
exclude
}
ip-address
prefix-length
] [
verbose
]
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
lsp-name
lsp-name
: Specifies the label switched path name comprising 1 to 15 characters.
include
: Displays only CR-LSPs with the destination IP address specified by the
ip-address
prefix-length
parameters.
exclude
: Displays only CR-LSPs with destination IP addresses other than the one specified by the
ip-
address
prefix-length
parameters.
ip-address
: Specifies the IP address of the FEC.
prefix-length
: Specifies the IP address prefix length, ranging from 0 to 32.
verbose
: Displays detailed information.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide.
•
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
•
exclude
: Displays all lines that do not match the specified regular expression.
•
include
: Displays all lines that match the specified regular expression.
•
regular-expression
: Specifies a regular expression, which is a case-sensitive string of 1 to 256
characters.
Examples
# Display brief information about all static CR-LSPs.
<Sysname> display mpls static-cr-lsp
total statics-cr-lsp : 1
Name FEC I/O Label I/O If State
Tunnel0 3.3.3.9/32 NULL/100 -/Vlan1 Down
Table 59
Command output
Field Description
Name
Static CR-LSP name
FEC
FEC associated with the destination IP address of LSP
I/O Label
Incoming/outgoing label
I/O If
Incoming/outgoing interface
