303
Field Description
State
Status of the sham link neighbor
Area
Destination IP address of the sham link
Cost
Cost of the sham link
State
Status of the sham link
Type
Type of the sham link
Timers
Timers of the sham link
display tunnel-policy
Description
Use the
display tunnel-policy
command to display information about a tunneling policy or all tunneling
policies.
Related commands:
tunnel-policy
and
tunnel select-seq
.
Syntax
display tunnel-policy
{
all
|
policy-name
tunnel-policy-name
} [
|
{
begin
|
exclude
|
include
}
regular-
expression
]
View
Any view
Default level
1: Monitor level
Parameters
all
: Specifies all tunneling policies.
tunnel-policy-name
: Specifies the name of a tunneling policy, which is a string of 1 to 19 characters.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display all tunneling policies.
<Sysname> display tunnel-policy all
Tunnel Policy Name Select-Seq Load balance No
------------------------------------------------------
t LSP 1
aaa LSP CR-LSP 1
bbb LSP 1
# Display tunneling policy aaa.
