Hospira GemStar Series, Руководство по эксплуатации системы

Страница: 79 / 221

Chapter 5. Intermittent
70 Hospira GemStar System Operating Manual
Intermittent Programming
1
Select
INTERMITTENT
from the Programming Menu.
2
Enter the dose amount in mL.
3
Enter the infusion time for each dose in hours:minutes (00:00).
For example, press [
4
] [
0
] if each dose is to deliver for 40 minutes.
4
Enter the frequency of dose deliveries.
For example, press [
4
] [
0
] [
0
] to start a dose every four hours.
5
Enter the total number of doses in the container.
To determine the number of doses in the container, divide the volume in the
container by the dose amount.
6
Enter the KVO rate in mL.
KVO delivers before a delayed start time, between doses, and after the last dose
until the total container is infused.
If no KVO is desired, press [
YES/ENTER
] while the value displayed is zero.
7
Enter the container size.
The pump automatically calculates the minimum container size required to deliver
the number of programmed doses and KVO between doses.
8
Select the air sensitivity, if required.
9
The pump displays
SET CALL BACK ALARM FOR NEXT DOSE?
• Press [
NO
] if you do not want to set the call back alarm.
• Press [
YES/ENTER
] to set the call back alarm.
Enter the time before the next dose that the alarm should sound. For example,
press [
1
] [
0
] to set the alarm to sound 10 minutes before the start of the next
scheduled delivery.
d Note: If KVO is desired before a delayed start, increase the container size to
include the desired KVO volume.
d
Note: DO NOT press [
YES
/
ENTER
] after selecting the air sensitivity. If
[
YES/ENTER
] is accidentally pressed and a call back alarm is not desired, press
[
BACK-UP
] to return to the beginning of step 9 and press [
NO
] .