Hospira GemStar Series, Руководство по эксплуатации системы

Страница: 160 / 221

Hospira GemStar System Operating Manual 151
Chapter 12. Troubleshooting
Other Display Messages
Other Display
Message
Cause/Condition Remedy
KEYPAD LOCKED
User has attempted to
perform a function that has
been locked out.
Unlock the keypad to access the
desired function.
NOT ALLOWED
DURING INFUSION
PRESS STOP TO
HALT DELIVERY
User has attempted to
perform a function that is
not available in
RUN
mode.
• Press [
STOP
] to access the
desired function.
• Press [
YES/ENTER
] to return to
the
RUN
mode display.
ROUNDING
THE PUMP SOUNDS
FOUR QUICK BEEPS
AND DISPLAYS THE
ROUNDED NUMBER.
The pump has rounded a
number that was entered
during programming.
Press [
YES/ENTER
] to accept the
rounded value and continue to the
next step.
DOSE IN PROGRESS
NEW CONTAINER
NOT ALLOWED
User has attempted to
access NEW CONTAINER
function when it is not
allowed.
1 Press [
STOP
].
2 Increase the container size to
complete the dose.
3 Set
NEW CONTAINER
through the Change Menu.
INFUSED XXXX.X mL
NO START DELAY
PRESS START
TO INFUSE
The pump has not delivered
any doses and there is no
start delay. Programmed
delayed start time has been
erased. If [START] is
pressed, the infusion will
begin immediately.
Press [start] to infuse dose. To
reprogram the delayed start time,
refer to Missed Start Time in
Chapter 5 Intermittent, on page 73
for instructions.
CANNOT CHANGE
CLOCK WHILE TIME
BASED DELIVERY
IS IN PROGRESS
User has attempted to
change the clock during a
time-based delivery.
1 Press [
STOP
].
2 Clear the program through the
Change Menu.
3 Change the clock through the
Options Menu.
4 Reprogram the pump.
PROGRAM EXCEEDS
MAX CONTAINER
SIZE. CHANGE
PROGRAM VALUES.
The VTBI + KVO volume
resulted in a container size
greater than the allowed
value.
1 Press [
HELP
] to display the
allowed values.
2 Change the program values.