Hospira GemStar Series, Руководство по эксплуатации системы

Страница: 113 / 221

Chapter 9. Variable Time
104 Hospira GemStar System Operating Manual
Variable Time Programming
1
Select
VARIABLE TIME
from the Programming Menu.
2
Select the phase type.
3
Select the unit of delivery.
4
Change the displayed time if necessary.
5
Enter the optional base rate with start and stop time.
6
If programming in Rates or Doses, go to step 7. If programming in Percentages,
set the daily amount. Then go to step 8.
7
Enter the phase information for each phase. Up to 24 phases can be programmed.
8
Enter the optional bolus dose and its lockout.
9
Enter the optional KVO.
10
Enter the container size.
The pump calculates the minimum container size required to deliver the phases,
base rate, and KVO for one day or in a 24-hour period. If delivering the protocol
for more than one day, multiply this amount by the number of days of
therapy .
11
Select the air sensitivity, if required.
d
Note: If programming in percentages, the total daily amount of all phases pro-
grammed must equal 100%.
d
Note: When entering time in 12-hour format, press or to toggle
between AM and PM.
d
Note: Increase the container size to include bolus deliveries.