Hospira GemStar Series, Руководство по эксплуатации системы

Страница: 128 / 221

Hospira GemStar System Operating Manual 119
Chapter 10. Options Menu
Air Sensitivity
1
Press [
OPTIONS
] and select
AIR SENSITIVITY
. The current air sensitivity
flashes on the display.
2
Select the desired Air Sensitivity level.
3
After selecting the desired Air Sensitivity, the
pump displays:
CHANGE AIR ALARM FROM
XXXX TO XXXX
:
• Press [
NO
] to keep the current air sensitivity.
The current air alarm status displays and the
pump exits
OPTIONS
.
• Press [
YES/ENTER
] to accept the new setting. The new air alarm status displays
and the pump exits
OPTIONS
.
Occlusion Sensor
1
Press [
OPTIONS
] and select
PUMP SETTINGS
.
2
Select
DISTAL OCCLUSION
from
the Pump Settings Menu.
3
Select the desired setting.
4
The pump displays
MAKE XXXXX DEFAULT?
• Press [
NO
] to temporarily change the distal
occlusion setting. The new setting will be in effect
until a new program is entered or the pump has been off for more than 24
hours.
• Press [
YES/ENTER
] to permanently change the distal occlusion setting. The
new setting will remain in effect until the setting is changed again through the
Options Menu.
WARNING: To reduce the risk of infusing air, use an air-eliminating
filter when the air sensitivity is set to OFF.
d
Note: If
OFF
is selected, the pump displays:
AIR ELIMINATING FILTER IS
RECOMMENDED. ENTER TO CONFIRM.
You
must press
[YES/ENTER]
to confirm.
AIR SENSITIVITY
1 ON
2 2 mL
3 OFF
CHANGE AIR ALARM
FROM:
XXXX
TO:
XXXX
YES OR NO
DISTAL OCCLUSION
1 HIGH
2 MEDIUM
3 LOW